Online Specials & Testimonials

FAQ & Our Locations

About Us

Services

Home

Home

Services

About Us

FAQ & Our Locations

Online Specials & Testimonials

Services

• Automatic & Standard Transmissions
• Foreign & Domestic Sales / Installation / Repair / Replace / Rebuild
• All Makes & Models
• Auto / Trucks / Vans
• Motor Homes with 3 -, 4 -, 5-Speed Transmissions
• High Performance Transmissions
• Scanner Diagnostics
• Late Model Specialists
• Overdrive Automatics
• Clutches / Fly Wheels
• Parts & Accessories
• Rebuilt Transmissions
• Transfer Cases & Axles

• Rear Ends
• CV Joints / Boots / U Joints
• Sealing Jobs
• 4 WD / Front WD / Overdrive
• Computerized Transmissions
• Diagnostics Multi-Check
• Rebuilt Drive Shafts
• 4 x 4 Transfer Cases
• Differentials
• Carry Outs
• Fleet Discounts
• Large Stock of Units
• Authorized Dealers' Extended Warranties
• Nationwide Warranties Available

(Easy Financing Available)

(Lifetime Labor Warranty
at no extra Charge)

FREE: TRANSMISSION PERFORMANCE CHECK
FREE: (ROAD TEST, COMPUTERIZED ANALYSIS & DIAGNOSIS)
FREE: TOW-IN • FREE: WARRANTY

Automatic Transmission Failures Causes and Preventions

Causes
Automatic transmissions fail in as many ways as there are car models. In contrast, there are only a few reasons why anyone needs automatic transmission repair. I break it down into four major categories: neglect, abuse, design flaws, and normal wear and tear.

Neglect
The number one area of neglect is inadequate routine maintenance. As the temperature of the oil increases, the chemical components start to break down. Over time, the lubricating properties of the oil are lost. If not replenished, bearings and bushings begin to wear. If these bushings and bearings wear out, they can cause internal leaks, which cause pressure losses, leading to clutch, band, and gear train failure and a need for a rebuilt transmission. Fluid and filter changes (routine transmission service) should be performed at regular intervals from 15,000 to 25,000 miles, depending on the type of use.

Vehicles used strictly for family transportation and for commuting to and from work should be serviced every 25,000 miles. Vehicles used for fleet service and medium-duty hauling need servicing every 15,000 miles, unless an auxiliary cooler is installed. More about coolers later.

A thorough transmission service procedure includes: a road test to check for proper shift points, shift quality; inspection for external leaks, proper throttle pressure adjustment, proper linkage adjustment; a look inside the pan for abnormal signs of wear and damage; replacement of the filter; and addition of new fluid. In case you're wondering, there is no way to reasonably change all the fluid. The pan usually holds four to six quarts of fluid, while the torque converter can hold up to nine quarts. Most converters cannot effectively be drained without drilling and plugging. Most vehicles don't allow access for this. Some older transmissions have a drain plug in the converter to allow draining of this component. Not even then will all of the old fluid be removed.

Some shops have recently invested in machines that claim to be able to give your transmission a complete transfusion by connecting to the cooler lines, pumping new fluid into the system, while simultaneously removing the old. The problem with this procedure, however, is that the converter acts as a reservoir. As new fluid enters, it does not force the old fluid out. Rather, the new fluid mixes with the old fluid inside the torque converter before it can be expelled from the transmission. In my opinion, to properly flush the system in this manner, one would need to circulate two to three times the capacity of the transmission through the system to get the job done. Even if this procedure were 100% effective, you would still need to remove the pan for filter replacement and inspection.

Abuse
This is an area of great controversy. What is abuse? Any type of use that the vehicle was not intended for. How do we know what was intended? We really don't know. If the manufacturers made an absolute statement about intended use, they would expose themselves to litigation on the matter.

In my opinion, any amount of extra weight that causes the driver to notice a difference in vehicle performance is approaching abuse to the degree that extra heat is generated. It's excess heat caused by extra stress that dramatically shortens the life of your transmission. If the heat cannot be adequately dissipated, then internal damage will result. It's that simple. In addition to extra heat being generated, there's the extra load on all of the internal components. Clutches and bands are designed to hold tightly under the load of normal weight and horsepower of the vehicle. Increases in either of these can cause trouble. Now, I know that not using your 3/4-ton truck to pull the family boat to and from the lake is not the answer you want to hear. But if you want to preserve your transmission to the maximum extent, then that's the correct answer. Personally, I pull my boat. But, I don't do so without taking precautions. Please consider the preventative measures listed in this brochure. Transmission overhaul is getting considerably more expensive these days. Preventative maintenance and proper driving habits are the best ways to avoid costly transmission repair.

Design Flaws
This is the area that most people find the hardest to accept . How is it that my new $28,000 truck could have design flaws that will cause premature failure of my transmission? If the vehicle manufacturer were to spend the time and money necessary to debug every facet of design, that $28,000 truck would cost $128,000 or more. Why do Rolls Royce and other comparable automobiles cost so much? They take more time in designing them and then work out the little problems in the design before they go to production. The government with all of its regulations, the demand by the public to produce vehicles quickly, and plain old human error simply make it impossible for any manufacturer to build anything perfect. That's why you see so many changes in design during the current model year and why technical service bulletins exist.

Comfortable shifts, less strain on the engine by the transmission oil pump, reduced weight of the transmission components, other parts of the vehicle in order to conserve fuel, more heat and other factors, all contribute to premature wear inside the transmission. To be fair, most manufacturers have made great progress in improving transmission reliability over the past ten years. They are more dependable today and last longer. But that does not mean they are flawless.

Normal Wear and Tear
Anything mechanical can, and will, at some point in time break down or wear out. Transmission failure is no exception. Bushings and bearings are usually the first components to go, with dynamically applied clutches and bands following . A reasonable service life can be from 40,000 to 150,000 miles or more depending on the type of use.

Prevention
First: there's a heat problem. Installation of a good quality auxiliary cooler is the first step. Why do I need a cooler? Does the factory provide one for me? Most vehicles are designed to circulate transmission fluid up to the radiator and back again through two steel lines. The coolant inside the radiator is what cools the transmission fluid. Yes, that's right. 200+ degree antifreeze tries to cool 300+ transmission fluid. Does not make a lot of sense, does it? Auxiliary oil coolers use the outside air temperature to cool fluid, which is far more efficient. The addition of one of these coolers can more than double the life of the fluid of the transmission.

Second: on many late model vehicles, reprogramming the transmission is also necessary in order to get enough fluid to the cooler, help the bands and clutches hold better, and provide an increase volume of lubrication oil to the gear train. On certain 1997 and later domestic vehicles this reprogramming has it's limitations. Due to the way the computer controls the transmission, changes made internally affect what the computer sees and how it controls the shifts, sometimes canceling the benefits of reprogramming. Be sure to ask a qualified expert. By qualified, I mean a technician who specializes in modifications and reprogramming, such as shift kits as separate transmission services.

I emphasize routine fluid changes. It's the single most important aspect of preserving your automatic transmission and preventing the need for a rebuilt transmission or overhauled transmission.